Jerin BRM-PD

Siffofi:

◆ Ƙarfin tauri da kuma kyawawan halaye masu kaifi idan aka kwatanta da lu'u-lu'u mai kama da monocrystalline.

◆ Yawan cirewa mai yawa, ƙarancin karce-karce, aikin gogewa mai daidaito idan aka kwatanta da lu'u-lu'u mai kama da monocrystalline.

◆ Tsananin lalacewa mai yawa da tsawon rai.

Tuntube mu

Bayani

Aikace-aikace

Bayanan Samfura

Aika Imel

Jerin BRM-PD

Halaye na Polycrystalline Diamond Foda:

(1) An shirya lu'ulu'u a cikin tsari mara tsari, don haka taurin ya kasance iri ɗaya kuma ba ya karkata;

(2) yana da ƙarfi mai yawa, musamman ƙarfin tasiri da juriyar lalacewa;

(3) Ana iya yin shi ta hanyar siffofi na musamman;

(4) Ana iya tsara ko annabta aikin wani samfuri don ya ba shi fasalulluka masu mahimmanci don dacewa da takamaiman amfanin sa;

Aikace-aikace

1. Goge saman yumbu daban-daban;

2. Aikace-aikace a fannin kayan semiconductor masu inganci;

3. Ana amfani da shi azaman kayan ɓoyewa da tsarin rikodin maganadisu don samfuran IT;

4. Latsawa da goge wafers na semiconductor kamar SiC da wafers na sapphire;

5. Ana amfani da shi azaman mai ko ƙarin mai, yana iya inganta aikin injina da ababen hawa na masana'antu, rage kurakurai da tsawaita tsawon lokacin aiki.

Lu'u-lu'u na Nanocrystalline na iya maye gurbin lu'u-lu'u guda ɗaya a cikin haƙo mai, zane-zanen waya daidai da kuma sarrafa na'urorin gani.

Ƙayyadewa	D10(μm)	D50(μm)	D90(μm)
BRM-PD 0-1	≥0.05	0.40-0.60	≤1.00
BRM-PD 0-2	≥0.05	0.90-1.10	≤2.00
BRM-PD 1-3	≥1.00	1.90-2.10	≤3.00
BRM-PD 2-4	≥2.00	2.90-3.10	≤4.00
BRM-PD 2-5	≥2.00	3.40-3.60	≤5.00
BRM-PD 3-6	≥3.00	4.40-4.60	≤6.00
BRM-PD 4-8	≥4.00	5.90-6.10	≤8.00
BRM-PD 5-10	≥5.00	7.40-7.60	≤10.00
BRM-PD 6-12	≥6.00	8.90-9.10	≤12.00